• 
• 

FALCONBRITE Disc

PU-impregnated

The axially pressed grinding fleece discs are anchored to a support tube. In addition it is permeated with a permanently elastic and wear-resistant impregnation. These flexible brushes are especially suitable for a uniform line drawing for technical or decorative surfaces. We deliver different hardnesses for every application.

Product Features

• Axially pressed FALCONBRITE blanks
• Different hardnesses
• Different grit sizes
• Temperature-stable thermoset impregnation
• Also available as long-life impregnation
• Constant hardness
• High micro-accuracy
• Adjustable flexibility
• High edge stability
• Reproducible surfaces
• Balanced

Applications

• Effective removal of corrosion, burrs, dirt
• Decorative, even surface finish with a defined roughness depth, e.g. stainless steel, copper and brass
• Removal of punching and firing burrs with defined edge rounding
• Matting and satinizing various metal and plastic parts
• Descaling flame cuts
• Finishing

Further Information

• arrow_drop_downHardness (relative hardness)

  extra soft	soft	medium	hard	harder *	very hard	extra hard
  -	3	-	-	6	-	-

  * Standard hardnesses

• arrow_drop_downGrit Size

  Grit Size according to FEPA		Type of Grain	Aluminium Oxide AL2O3		Silicon Carbide SiC		Flint
  		Description	Clean & Finish	High Performance	Clean & Finish	High Performance	Clean & Finish
  36	FBS	strip	-	-	-	CS 02	-
  80	CRS	coarse	A 03	C 03	S 03	-	-
  100	MED	medium	A 04	C 04	S 04	-	-
  120	MDF	medium fine	A 05	-	-	-	-
  180	FIN	fine	A 06	C 06	S 06	-	-
  280	VFN	very fine	A 07	C 07	S 07	CS 07	-
  500	SFN	super fine	-	-	S 08	-	T 08
  800	UFN	ultra fine	-	-	S 09	CS 09	-
  1000	XFN	extra fine	A 12	-	S 10	-	-
  1500	XXFN	extreme extra fine	A 15	-	S 15	-	-

• arrow_drop_downStandard Dimensions in Millimetres

  Outside Ø in mm	Width in mm	Inside Ø in mm
  90	10 - 2000	35	-	-	-	-	-
  100	10 - 2000	35	-	-	-	-	-
  110	10 - 2000	35	-	-	-	-	-
  115	10 - 2000	35	-	-	-	-	-
  125	10 - 2000	50	50,8	-	-	-	-
  150	10 - 2000	50	50,8	76,2	-	-	-
  200	10 - 2100	76,2	90	100	-	-	-
  250	10 - 2100	117	127	-	-	-	-
  300	10 - 2100	127	140	146,5	150	170	-
  350	10 - 2100	190	200	203	220	230	-
  400	10 - 2600	240	250	254	-	-	-
  450	10 - 2100	240	250	254	270	330	340
  500	10 - 2100	330	340	-	-	-	-

• arrow_drop_downStandard Dimensions in Inches

  Outside Ø in inches	Width in inches	Inside Ø in inches
  3,5	4 - 78	1,38	-	-	-	-	-
  4	4 - 78	1,38	-	-	-	-	-
  4,33	4 - 78	1,38	-	-	-	-	-
  4,5	4 - 78	1,38	-	-	-	-	-
  5	4 - 78	1,96	2	-	-	-	-
  6	4 - 78	1,96	2	3	-	-	-
  8	4 - 82	3	3,5	4	-	-	-
  10	4 - 82	4,6	5	-	-	-	-
  12	4 - 82	5	5,5	5,75	5,9	6,7	-
  13,75	4 - 82	7,5	7,9	8	8,66	9	-
  15,75	4 - 100	9,44	9,85	10	-	-	-
  17,75	4 - 82	9,44	9,85	10	10,6	13	13,4
  20	4 - 82	13	13,4	-	-	-	-

• arrow_drop_downFlanges

  We supply suitable flanges made of aluminium, steel, stainless steel, PVC, cork and MDF (also according to drawing).

  

  

  
• arrow_drop_downSafety Instructions
  

  Please wear suitable hearing protection!

  

  Please wear suitable eye protection!

  

  Please wear suitable gloves!

  

  Please wear a suitable dust mask!

  When using our products mechanically, please follow the technical instructions of the machine manufacturer!

• arrow_drop_downCutting Speeds

  Recommended cutting speeds V_c in m/s depending on rotational speed V_u

  Vu r.p.m.	Outside Ø in mm
  	100	125	150	200	250	300	350	400	450	500
  700	4	5	5	8	9	11	13	15	17	18
  850	4	6	6	9	11	13	15	18	20	22
  950	5	6	7	10	12	14	16	19	22	25
  1200	6	8	10	12	16	19	22	25	not permitted	not permitted
  1400	7	9	11	15	18	22	25	not permitted	not permitted	not permitted
  1600	8	11	13	17	21	25	not permitted	not permitted	not permitted	not permitted
  1800	9	12	14	19	24	not permitted	not permitted	not permitted	not permitted	not permitted
  2000	10	13	15	21	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  2200	12	14	17	23	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  2400	13	15	19	25	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  2600	14	17	20	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  2800	15	18	22	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  3000	16	20	24	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  3200	17	21	25	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  3400	18	22	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  3600	19	24	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  3800	20	25	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  4000	20	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  4200	22	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  4400	24	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted
  4600	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted	not permitted

  Under no circumstances should you exceed the maximum cutting speed of Vc 25 m/s stated on the products!
  
  The values given in the table are rounded figures (cutting speed Vc). When using the products in practice, the actual cutting speed should first be checked using the following formula.
  

  Calculation of the cutting speed:	Vc =	D x π x n / 60.000
  	D =	Tool diameter in mm
  	n =	Speed (rpm)
  	π =	3,14

• arrow_drop_downDownload Product data sheet
  Product data sheet FALCONBRITE Disc PU-impregnatedpicture_as_pdf